19
Operation
Touch Pad
Use the touch pad to move the cursor on the screen and perform computer operations.
or
Function Operation
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Vertical Scroll
Horizontal Scroll
Move the tip of your finger
lightly over the work surface.
A. Work Surface (Touch Pad)
B. Left Button
C. Right Button
Refer to [Mouse Properties] for information on basic operations other than the above.
To display [Mouse Properties], click [start] - [Control Panel] - [Printers and Other Hard-
ware] - [Mouse].
When using the touch pad, keep the following in mind.
• By design the touch pad is to be used with a finger tip only. Do not place any object on
the work surface or press down forcefully with sharp-pointed objects (e.g., nails) or
hard objects that can leave marks (e.g., pencils and ball point pens).
• Try to avoid having any harmful substances, such as oil, come in contact with the
touch pad. The cursor may not work properly in such cases.
NOTE
or
Two quick taps, but on the
second tap leaving your fin-
ger down (applying pres-
sure) and moving it on the
work surface.
While holding down the
button, moving your finger
on the work surface.
Trace a circle around the touch pad.
Trace a circle around the touch pad. ( “Using the
Touch Pad”)
The setup is required before using this function. (
“Using the Touch Pad”)
To right-click: Can only be performed by clicking the right but-
ton.
or
or
tapping clicking
double-tapping double-clicking