Panasonic DMC-FS12, DMC-FS62 Charging the Battery

VQT2D57 (ENG)

Preparation

Charging the Battery

∫About batteries that you can use with this unit

The battery that can be used with this unit is DMW-BCF10E.

•Use the dedicated charger and battery.

•T his unit has a function that can distinguish useable batteries. Exclusive batteries

(DMW-BCF10E) are supported by this function. (Conventional batteries not supported

by this function cannot be used.)

•The battery is not charged when the camera is shipped. Charge the battery before use.

•Charge the battery with the charger indoors.

•Charge the battery in a temperature between 10 oC to 35oC. (The battery temperature should

also be the same.)

It has been found that counterfeit battery packs which look very similar to the

genuine product are made available to purchase in some markets. Some of these

battery packs are not adequately protected with internal protection to meet the

requirements of appropriate safety standards. There is a possibility that these

battery packs may lead to fire or explosion. Please be advised that we are not

liable for any accident or failure occurring as a result of use of a counterfeit

battery pack. To ensure that safe products are used we would recommend that a

genuine Panasonic battery pack is used.

• The AC cable does no t fit entirely into

the AC input terminal. A gap will remain

as shown below.

• Charging starts when the [CHARGE]

indicator A lights green.

• Charging is complete when the

[CHARGE] indicator A turns off (after

approx. 130min).

DMC-FS12&FS62GC-VQT2D57_eng.book 10 ページ２００９年３月２３日　月曜日　午後４時４１分