Panasonic DMC-FX40/DMC-FX48 operating instructions How to replace the Fuse, Care of the camera

Models: DMC-FX40/DMC-FX48

1 26
Download 26 pages 47.61 Kb
Page 4
Image 4

How to replace the Fuse

The location of the fuse differ according to the type of AC cable (figures A and B). Confirm the AC cable fitted and follow the instructions below.

Illustrations may differ from actual AC cable.

1Open the fuse cover with a screwdriver.

Figure A

Figure B

Fuse cover

2Replace the fuse and close or attach the fuse cover.

Figure A

Fuse

(5 ampere)

Figure B

Fuse

(5 ampere)

Care of the camera

Do not strongly shake or bump the camera by dropping or hitting it. Do not subject to strong pressure.

The camera may malfunction, recording pictures may become impossible, or the lens, the LCD monitor or the external case may be damaged.

We strongly recommend you do not leave the camera in your trousers pocket

when you sit down or forcefully insert it into a full or tight bag etc. Damage to the LCD monitor or personal injury may result.

• Do not attach any other items to the hand strap that’s included with your camera. While being stored, that item can rest against the LCD monitor and damage it.

• Be particularly careful in the following places as they may cause this unit to malfunction.

Places with a lot of sand or dust.

Places where water can come into contact with this unit such as when using it on a rainy day or on a beach.

Do not touch the lens or the sockets with dirty hands. Also, be careful not to allow liquids, sand and other foreign matter to get into the space around the lens, buttons etc.

This camera is not waterproof. If water or seawater splashes on the camera, use a dry cloth to wipe the camera body carefully.

If the unit does not operate normally, please contact the dealer where you purchased the camera or the repair service centre.

About Condensation (When the lens is fogged up)

Condensation occurs when the ambient temperature or humidity changes. Be careful of condensation since it causes lens stains, fungus and camera malfunction.

If condensation occurs, turn the camera off and leave it for about 2 hours. The fog will disappear naturally when the temperature of the camera becomes close to the ambient temperature.

4 VQT1X72 (ENG)

Page 4
Image 4
Panasonic DMC-FX40/DMC-FX48 How to replace the Fuse, Replace the fuse and close or attach the fuse cover