Connecting to other equipment
92
VQT0Y19
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC
by connecting the camera and the PC.
The software [LUMIX Si mple Viewer] (for
Windows®) in the CD-ROM (supplied)
allows you to easily acquire pictures
recorded with the camera to a PC, print
them and send them by e-mail.
If you use “Windows98/98SE”, install
the USB driver and then connect it to
the computer.
For information about installing [LUMIX
Simple Viewer] etc., refer to the separate
operating instructions for PC connection.
: USB connection cable (supplied)
: AC adaptor (DMW-AC5; optional)
•Use a batter y with sufficient battery power
or the AC adaptor (DMW-AC5; optional).
•Turn the camera off before inserting or
removing the cable for the AC adaptor
(DMW-AC5; optional).
•Set the cam era to a mode other than
[] mode.
1Turn on the camera and the PC.
2Connect the camera to a PC via
the USB connection cable
(supplied).
•Connect the US B connection cable with
the [ ] mark facing the [] mark on
the [DIGITAL] socket.
•Hold the USB connection cable at
and insert straight in or take straight
out. (If you forcibly insert the USB
connection cable at a slant or upside
down you can deform the connection
terminals and damage the camera or
the connected equipment.)
: This mes sage appears during data
transfer.
[Windows]
The drive appears in the [My Computer]
folder.
•If you are connecting the c amera to a PC
for the first time, the required driver is
installed automatically so that the camera
can be recognized by “Windows Plug and
Play”. The drive then appears on the
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
•The drive is displayed as [LUMIX] when
you connect the camera with no card
inserted.
•The drive is displayed as [NO_NAME] or
[Untitled] when you connect the camera
with a card inserted.
DIGITAL
AV OUT
DC IN
ACCESS