VQT2G40 (ENG)
22
Basic
[REC] Mode: ñ
Taking pictures using the automatic function (ñ: Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and the recording
conditions so we recommend this mode for beginners or those who want to leave the
settings to the camera and take pictures easily.
•The following functions are activated automatically.
–Scene detection/[STABILIZER] /[INTELLIGENT ISO]/F ace de te ct i on /[QUICK AF]/
[I.EXPOSURE] (Intelligent Exposure)/Digital Red-eye Correction/Backlight Compensation
Slide the [REC]/[PLAYBACK] selector switch to [!].
Set the mode dial to [ñ].
•Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor
(DMW-AC7PP; optional) when the access indication is lit [when pictures are being
written, read or deleted, or the built-in memory or the card is being formatted].
Furthermore, do not subject the camera to vibration, impact or static electricity.
The card or the data on the card may be damaged, and this unit may no longer
operate normally.
If operation fails due to vibration, impact or static electricity, perform the
operation again.
Press the shutter button halfway to focus.
•The focus indication 1 (green) lights when the subject
is focused.
•The AF area 2 is displayed around the subject’s face
by the Face Detection function. In other cases, it is
displayed at the point on the subject which is in focus.
•The focus range is 1cm (0.04 feet) (Wide)/1 m
(3.28 feet) (Tele) to ¶.
•The maximum close-up distance (the shortest distance
at which the subject can be taken) differs depending on
the zoom magnification.
Press the shutter button fully (push it in
further), and take the picture.
•
The access indication lights red when pictures are being
recorded on the built-in memory (or the card).
1
2
DMC-FZ38&FZ35P-VQT2G40_eng.book 22 ページ ２００９年６月３０日 火曜日 午後６時３３分