29
(ENG) VQT3Q89
Recording Mode:
Taking Pictures with Your Favourite Settings

(Programme AE Mode)

The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in [REC] Mode
menu.
Set Recording Mode to [ ].
Note
The shutter speed is automatically set between about 20seconds
and 1/4000th of a second in the following cases.
When the [SENSITIVITY] is set to [ISO160].
When the aperture value is set to F2.5 [when the interchangeable lens (H-H014) is attached].
When the aperture value is set to F3.5 [when the interchangeable lens (H-FS014042 or
H-PS14042) is attached].
In Programme AE Mode, you can change the preset aperture value and shutter speed
without changing the exposure. This is called Programme Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Programme AE Mode.
1Press the shutter button halfway and display the
aperture value and shutter speed value on the screen.
2While the values are displayed (about 10 seconds),
perform the Programme Shift by rotating the control
dial.
During display of the numerical values, each press of the cursor button 3 switches
between Programme Shift and Exposure Compensation.
Rotate the control dial to display the [EXPO.METER] B.
The Programme Shift indication A appears on the screen when Programme Shift is
activated.
To cancel Programme Shift, turn the camera off or rotate the control dial until the
Programme Shift indication disappears.
Programme Shift
A B
DMC-GF3C&GF3K&GF3W&GF3_VQT3Q89_eng.book 29 ページ 2011年9月8日 木曜日 午前10時25分