Panasonic DMC-ZS15, DMC-TZ25 operating instructions Burst function, Setting Speed Description

Burst function

Recording mode:

A burst of still pictures can be recorded while the shutter button is pressed fully.

Select [Burst] from the [Rec] menu

Use cursor button to select the burst setting, and press [MENU/SET]

Setting		Speed	Description	No. of
				pictures
	∗1	Approx. 2 - 5	••The burst speed is adjusted automatically in
			accordance with the movements of people, pets	100
		pictures/sec.	or other subjects. ([Intelligent Burst mode])
			••The subject is brought into focus as far as this
		Approx. 2	is allowed by the burst speed. The pictures are
		pictures/sec.	taken with the burst function while the exposure
			and White Balance are being adjusted.	100
			(However, when the burst function is operating
		Approx. 5	during motion picture recording, the focus is
			fixed to the first picture.)
		pictures/sec.	••The burst speed may be reduced under certain
			recording conditions.
		Approx. 10	••Focus, exposure and White Balance are fixed in	4
		pictures/sec.	the first picture.
			••Focus, exposure and White Balance are fixed in
		40 pictures/sec.	the first picture.	40

••Note on the picture size setting (→73)

••Focus, exposure and White Balance are fixed in

			60 pictures/sec.		the first picture.	30
					••The recordable range is reduced.
					••Note on the picture size setting (→73)
					••The burst of still pictures can be recorded even
			Complies with		in low light conditions as the flash is used.
					••The focus, exposure, and flash level are all
		∗2		recording		5
				conditions	fixed to the settings for the first picture.
					••When [Selftimer] is set, 5 pictures are taken.
					••Note on the picture size setting (→73)
	[OFF]			—	The burst function is released.	—
∗1 Only in the				mode
∗2 Only in the				mode

- 72 -