STEP 3 : Connecting to a broadband network

The following services can be used when this unit is connected to broadband.

Firmware can be updated (> 14)

You can enjoy BD-Live (> 18)

You can enjoy VIERA CAST (> 23)

For details about connection method, refer to the instructions supplied with the connected equipment.

It may not work properly depending on the equipment or environment used.

Using LAN (ethernet) cable

LAN Cable

Broadband router, etc.

LAN Cable

Modem (Broadband) *Provided by ISP

Use shielded LAN cables when connecting to peripheral devices.

Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.

10

Using Wireless LAN Adaptor (DY-WL10)

Wireless LAN Adaptor (included)

Wireless router (Access point), etc.

LAN Cable

Modem (Broadband) *Provided by ISP

Wireless LAN Adaptors other than the included Wireless LAN Adaptor cannot be used.

When connection conditions are poor, use the included USB extension cable to connect the Wireless LAN Adaptor provided with this unit.

Do not use any other USB extension cables except the supplied one.

For up to date compatibility information on your Wireless router (Access Point) refer to http://panasonic.co.jp/pavc/global/cs

For additional information about this unit refer to http://www.panasonic.com/consumer/support

Precautions of Wireless LAN Adaptor

The following limits are in place regarding the usage of this device. You must be aware of these limits before using this device.

Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this device.

This device is to be used as a wireless LAN device.

Do not use this device to connect to any wireless network for which you do not have usage rights.

During automatic searches in a wireless network environment, wireless net- works (SSID*) for which you do not have usage rights may be displayed; how- ever, using these networks may be regarded as illegal access.

*An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.

Data transmitted and received over radio waves may be intercepted and monitored.

This wireless LAN adaptor contains delicate electronic components. Please use this adaptor in the manner in which it was intended and follow the following points:

– Do not expose the adaptor to high temperatures or direct sunlight.

– Do not bend, or subject the adaptor to strong impacts.

– Keep the adaptor away from moisture.

– Do not disassemble or alter the adaptor in any way.

– Do not attempt to install the adaptor in any incompatible device.

VQT2H76

Page 10
Image 10
Panasonic DMP-BD85EGK operating instructions Connecting to a broadband network, Precautions of Wireless LAN Adaptor