15
RQT9434
Quick Start
Guide
Media handling (Disc/USB memory/SD card)
1Press [<OPEN/CLOSE] to open the tray.
2Press [<OPEN/CLOSE] to close the tray.
[RAM] It is not possible to record or play continuously from one side
of a double sided disc to the other. You will need to eject the disc
and turn it over.
Inserting the USB memory
When the USB indicator (“USB”) on the unit’s display is flashing, the
USB memory is being read from. Do not turn off the unit or remove
the USB memory. Such action may result in malfunction or loss of
the USB memory’s contents.
Before inserting any USB memory to this
unit, ensure that the data stored therein
has been backed up.
Check the orientation of the USB
connector and insert it straight in.
Insert an USB device while the unit is
stopped, so the “USB” screen is
displayed. Select an item and press [OK]
to switch to the USB-related operations (>62, 63).
Removing the USB memory
Complete all USB-related operations and pull the USB memory
straight out.
If a USB memory being accessed is pulled out, then the data may
be damaged.
When the card indicator (“SD”) on the unit’s display is flashing, the
card is being read from or written to. Do not turn off the unit or
remove the card. Such action may result in malfunction or loss of the
card’s contents.
Inserting foreign objects can cause a malfunction.
Inserting the card
Removing the card
1Press on the centre of the card.
2Pull it straight out.
How to hold a disc or card
Do not touch the recorded surface or the terminal surface.
If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
Handling precautions
Do not attach labels or stickers to discs. (This may cause disc
warping and unbalanced rotation, rendering it unusable.)
Write on the label side of the disc only with a soft, oil-based felt
pen. Do not use ballpoint pens or other hard writing implements.
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
Do not use scratch-proof protectors or covers.
Do not expose the terminals of the card to water, garbage or other
strange things.
Do not drop stack, or impact discs. Do not place objects on them.
Do not use the following discs:
Discs with exposed adhesive from removed stickers or labels
(rental discs, etc.).
Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart
shapes.
Do not place in the following areas:
In direct sunlight.
In very dusty or humid areas.
Near a heater.
Locations susceptible to significant difference in temperature
(condensation can occur).
Where static electricity or electromagnetic waves occur.
To protect discs from scratches and dirt, return them to their cases
when you are not using them.
Inserting discs
Disc With a Cartridge
BD-RE with a cartridge cannot be used with this unit.
(It cannot be used even if it is taken out from the cartridge)
Remove the DVD-RAM or 8 cm disc from the cartridge and
place it on the tray. (TYPE1 cannot be used)
Refer to the instructions on how to remove the disc from the
cartridge.
Inserting, removing the USB memory
Inserting, removing the SD card
Insert label-up.
ADAPTER
If you are using a
miniSD card, a
miniSDHC card, a
microSD card or a
microSDHC card, insert
it into the adaptor that
comes with the card.
Insert and remove this
adaptor from the unit.
Press on the centre of
the card until it clicks
into place.
Insert the card label up with the cut-off corner on the right.
e.g.,
miniSD
Disc and card care
The manufacturer accepts no responsibility and offers no
compensation for loss of recorded or edited material due to a
problem with the unit or recordable media, and accepts no
responsibility and offers no compensation for any subsequent
damage caused by such loss.
Examples of causes of such losses are
A disc recorded and edited with this unit is played in a Blu-ray
Disc Recorder or computer disc drive manufactured by another
company.
A disc used as described above and then played again in this
unit.
A disc recorded and edited with a Blu-ray Disc Recorder or
computer disc drive manufactured by another company is played
in this unit.
DO
DO NOT
DO DO NOT
DO NOT
DMRBS850&750EG-RQT9434-L_eng.book 15 ページ 2010年1月14日 木曜日 午後4時21分