16
RQT9434
STEP
1
Inserting the CAM (Conditional Access Module) and Smart Card
You need a Conditional Access Module together with a valid Smart Card and a subscription with the corresponding broadcaster.
1Insert the certified Smart Card into the commercially available CAM (Conditional Access Module).
2Insert the CAM into the CI (Common Interface) slot of this unit.
TV service encryption is automatically cancelled and the service can be viewed or recorded.
≥You can insert one or two different CAMs with Smart Cards into this unit.
However, it will not operate properly when two CI Plus compatible CAMs are simultaneously inserted.
∫PIN query
When you turn the unit on after inserting the card, depending on the card provider, a PIN may be demanded.
Enter the 4-digit code with the numbered buttons.
[Note]
≥Be sure to insert the CAM horizontally into the slot.
≥Do not insert the CAM and Smart Card upside down.
≥For more details, see the manual of the CAM and Smart Card, or consult the dealer.
≥The Common Interface supports the modules according to DVB Specification and CI Plus Specification.
≥Unplug the AC mains lead before you insert or remove the CAM with Smart Card. Remove it slowly.
10BASE-T/
100BASE-TX
LNB
LNB
IN 1
IN 1
LNB
LNB
IN 2
IN 2
OPTICAL
COAXIAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
AC IN
COMPONENT
VIDEO OUT
OUT
AUDIO
OUT
VIDEO
L
R
Y
R
P
B
P
AV1
(TV)
VIDEO
RGB/S VIDEO
AV2
(EXT)
VIDEO
RGB/S VIDEO
1
2
COMMON INTERFACE
13V/18V
400mA max.
CI (Common Interface) slot
CAM (Conditional Access Module)
Smart Card
This unit’s rear panel
Adjust the position marks. Label facing upwards
DMRBS850&750EG-RQT9434-L_eng.book 16 ページ ２０１０年１月１４日 木曜日 午後４時２１分