Panasonic DMR-EZ47 installation instructions Firmware History, Applicable Models, Purpose

1 Firmware History

1.1Applicable Models

DMR-EZ47, DMR-EZ475

Includes models with suffix K, S, V, VK, VP, or VS

1.2Purpose

UJ-225

Improved playback DVD+R media which was recorded by SONY DVD Recorder.

Optimization of track jump control for CD-RW.

Improvement of recording quality for DVD-R DL.

UJ-217

Enhances Closed Captioning display.

Enables the unit to the download the New V-Chip/Regional Rating Table (RRT).

UJ-205

Modification to improve VHS Timer Recording.

UJ-201

ATSC level meter indication improvement with weak signal.

Stops disc rotation when the [EJECT] button is pressed.

UJ-196

Countermeasure for occurred aging mode by remote control signal.

Protection against Drive unit fuse blowing due to customer Disc condition.

Improved HDMI function. (Depends on TV)

Upgrade program for next generation drive.

UJ-190

When recording program of 5.1 channel audio, the center channel audio is not output.

The title information of the recorded program is not displayed correctly.

UJ-184

Hang-up sometimes occurs using JPEG of RAM disc on "Direct Navigator".

"Copying has been stopped" message is displayed on the "Status" screen.

"oooooo" is indicated continuously on power off after malfunction occurs.

DVD-Video is played back on indication of "oooooo" after power off using EZ-Sync.

DMR-EZ47 DVD Recorder Firmware Installation Instructions

Page 2 of 8