Pre Installation Information

Setup as SMTP Mail Server

To install your machine as SMTP Mail Server, the following network parameters need to be programmed on your network, and on your machine.

TCP/IP Address of your machine

TCP/IP Subnet Mask of your machine

TCP/IP Address of the Default Gateway

Host Name

TCP/IP Address of the DNS Server (if not available, see Note 2)

Email Address of your machine (See Note 1)

Name, or IP Address of the Default SMTP mail server

SMTP Authentication Name (when the authentication with the SMTP server is required)

SMTP Authentication Password (when the authentication with the SMTP server is required)

Email (from your machine to a PC) and Direct Internet Fax XMT Transmission

ifaxuser@fax01.panasonic.com

SMTP01.panasonic.com

(SMTP Mail Server)

Direct Internet Fax XMT

Gateway(Router)

 

 

 

 

 

 

 

 

POP02.panasonic.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SMTP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

POP3

 

 

(POP Server)

 

 

 

 

 

 

 

 

 

popuser001@panasonic.com ifaxuser@fax02.panasonic.com

Email (from a PC to your machine) and Direct Internet Fax XMT Reception

ifaxuser@fax01.panasonic.com

SMTP01.panasonic.com

(SMTP Mail Server)

Direct Internet Fax XMT

Gateway(Router)

SMTP

popuser001@panasonic.com ifaxuser@fax02.panasonic.com

NOTE

1.To function as SMTP mail server, your machine's email address must include its unique Host name within your company domain. This unique Host name must be registered within your network’s DNS (Domain Name System) server. Ex: Internet_Fax@fax01.panasonic.com

2.By default the machine requires the IP Address of the DNS Server, and prompts you to enter the SMTP Server Name.

If the DNS Server is not available, change the 27(DNS Server Address) of General Settings to "No".

Press FUNCTION GENERAL SETTINGS 09 Key Operator Mode , Input Key

Operator’s password, OK 27 DNS Server Address .

108