Placing Originals (Copy)
Product | Overview |
■How to Place Originals
●On the ADF
Set the originals up to the upper limit indicator.
Upper Limit
Indicator
Upper Guide
ADF Tray
Original Guides
Adjust to the original’s width
When copying a thick Booklet, open the ADF and verify that the ADF Hinge was returned to original position if the rear of the ADF was raised.
13
24
Copying
Notice for ADF
●Once the originals are set, press Start key, and do not touch the originals as it may cause them to jam.
●Before setting the originals on the ADF, make sure they are free of clips or staples.
Originals that cannot be used
●Drawing papers, Transparencies, Labeling paper, Heavy weight papers, Thin Art papers, Film, Thermal papers
Inappropriate Originals
●Papers which are curled, ripped, creased, folded, punched, glued, stapled or self adhesive.
●Originals of assorted (mixed) width size (except for the combination of Ledger and Letter)
●
●Pressure sensitive or carbon backed papers
●Paper with excessive curl
●Stapled originals
●Freshly printed copies from a laser printer which is still wet with color ink or whiteout.
●Originals with fresh
●On the Platen
Notice for Platen
Align the original to top left corner mark ( ).
●If the original is not positioned properly, a portion of the original may not be copied.
●For originals smaller than 5.5" x 8.5" (Invoice) size, position the original within the 5.5" x 8.5" area and select 5.5" x 8.5".
INV
INV LTR LGL
LTR LDR
Original Guides
INV | LTR |
|
|
|
| INV | LTR | LGL | LDR |
INVOICE | LEGAL | LEDGER |
LETTER
Ex: Book Original | Ex: Sheet Original |
21