Stop Key

4 Select the required settings.

Ex: Copy Contrast and Original Mode

Adjust the Manual Contrast (7 levels)

or

Select type of Original(s)

Mainly Text

Text and Photo combined

Mainly Photo

●For other mode settings, refer to the Operating Instructions (For Copy & Function Parameters)

●When clearing the copy mode settings, press the Reset key. (See NOTE)

5 Enter the desired number of copies, and then press the Start key.

Start Key

Number of copies

(Up to 999)

●Clear Key

When changing the number of copies, press the Clear key and reenter the corrected number of copies.

●Number of Copies

The maximum number of copies is up to 999 (3 digits with keypad).

When the optional Fax Communication Board (DA-FG600) is installed:

During the copy mode, if you input 4-8 digit numbers, they will be interpreted as being a phone number and displayed on the LCD, then the machine will switch to the Fax mode.

NOTE

●To stop the copy job, press the Stop key. The cancellation message will appear on the LCD. Follow the instructions on the Touch Panel Display.

Reset Key

● Memory Full

If memory overflows during original scanning, the message “Cannot Complete Job / Exceeds Memory Capacity / Output Current Pages? 1:YES 2:NO” will be displayed on the LCD. If this occurs, follow the instructions on the LCD. If this occurs frequently, adding optional memory is recommended, consult with an authorized service provider.

23

Copying