Fixing the charging base to the wall
1.Attach two screws to the wall as illustrated.
•Do not attach the charging base above the sink as it may fall into the water.
•Screws are sold separately. Use screws of 2.7 mm to 3.1 mm in diameter.
25mm
28mm
English | Store | Storing and charging the trimmer |
| ||
|
|
Place the trimmer on the charging base when storing or charging it.
You can fully charge the trimmer in 8 hours if it is losing speed. The oil and the cleaning brush also can be placed in their respective holders in the charging base.
1.Pass the power cord through one of the cord guides on the right or left.
2.Plug the power cord into a household outlet and place the charging base on a flat surface.
3.Turn off the trimmer and insert it in the charging base as illustrated.
•The charge indicator lamp lights and stays on until the trimmer is removed from the charging base.
•A full charge supplies enough power for approximately 10 trims (5 minutes per trim for a normal beard).
•Charge the trimmer for at least 16 hours when charging it for the first time or when it has not been used for more than 6 months.
•If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration.
2.Hook the charging base onto these screws.
3.Plug the power cord into a household outlet.
Use | Using the trimmer |
| |
|
|
The following is the symbol for a wet trimmer. The symbol means the
Trimming your moustache
1. Apply a few drops of the oil to the blades.
2. Grasp the sides of the comb attachment and move it to the desired trimming length (between 3 mm and 15 mm).
Indicator | Trimming length |
|
|
1 | 3 mm (1/8˝) |
2 | 6 mm (1/4˝) |
3 | 9 mm (3/8˝) |
4 | 12 mm (1/2˝) |
5 | 15 mm (5/8˝) |
