Cutting
procedure
Cutting the sides and back Cutting by adjusting the length
of the Trimmer Comb attachment
Cut against the
direction the hair lays
Trimming height
Secure the trimmer
comb attachment
before cutting.
The trimmer will not
cut more than the set
trimming height.
The actual hair length will be longer than the set trimming height.
Do not use the trim-
mer switch side up as
shown in the illustra-
tion on the left. This
will result in cutting
more than the desired
length.
Side with
the switch
Cut from the sides and back to
around the ear, the collar area
and the nape of neck, adjusting
the cutting height from 25mm
(15/16") to 5mm (3/16").
25mm (15/16")
5mm (3/16")
Make sure the sw-
itch is facing down-
wards during use.
Make sure the switch is facing downwards before
attempting to cut.
Length of hairSetting
9 10
5
4
3
2
1
approximately 25 - 40 mm (15/16 - 1 9/16")
approximately 20 - 30 mm (13/16 - 1 3/16")
approximately 15 - 20 mm (9/16 - 13/16")
approximately 10 - 15 mm (3/8 - 9/16")
approximately 5 - 10 mm (3/16 - 3/8")
Having secured the trimmer comb attachment onto the body