English
Parts identification
ABlade
BAttachment mounting |
CSwitch |
| 3 | 6 | |
|
|
|
|
•The charging time is 8 hours.
•1 full charge will provide approximately 40 minutes of continuous operation.
•If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration.
DCharging indicator lamp |
E1/8" / 1/4" (3/6mm) comb |
attachment |
F3/8" / 1/2" (9/12mm) comb |
attachment |
Inserting the attachment
►0.8" / 1.2" / 1.6" (20/30/40mm) comb attachment 1. Adjust the attachment to the desired
trimming height by sliding it until it
G0.8" / 1.2" / 1.6" (20/30/40mm) |
comb attachment |
HLever for cleaning |
IAC adaptor (RE9‑45) |
JPower cord |
KOil |
LCleaning brush |
clicks while the switch is in “0•CHARGE”.
• Set the attachment to the correct position. |
Otherwise you cannot set the switch to “1”. |
• Actual hair length will be a little longer than |
the height you set. |
►1/8" / 1/4" (3/6mm), 3/8" / 1/2" (9/12mm) comb |
Charge | Charging |
|
1. Set the switch | 2. Connect the AC | 3. Disconnect the |
to “0•CHARGE”, | adaptor into an | AC adaptor |
and insert the | outlet. The | from an outlet |
power cord into | charging | when charging |
the clipper. | indicator lamp | is completed. |
| will light up. |
|
attachments |
1/4"
1/8"
3/8"
1/8" / 1/4"
1/2"
3/8" / 1/2" |
|
|
1. Select the | 2. Mount the | 3. Remove the |
cutting heights | attachment to | attachment |
indicated on the | the clipper as | from the clipper. |
insides and | illustrated. |
|
sides of the |
|
|
attachments. |
|
|
