How to remove the
ATTENTION:
A nickel metal hydride battery that is recyclable powers the product you have purchased.
Please call
R B R C 
T M
N i - M H
The battery in this shaver is not intended to be replaced by consumers. However, the battery may be replaced at an authorized service center. The procedure described below is intended only for removal of the rechargeable battery for the purpose of proper disposal.
WARNING:
Do not attempt to replace the battery for the purpose of reusing the shaver. This could result in the risk of fire or electric shock.
1Remove four screws (a).
2Remove two screws (b).
3Using a flat screwdriver (c), and insert into the space (d) to remove the panel (e).
4Using a flat screwdriver (f), and insert into the space (g) to remove the panel (h).
5Pull the housing (i) out of the end cap (j).
6Remove two screws (k) | ( m) |
inside of the end cap and |
|
pull the battery. |
|
7Using a flat screwdriver (l), and insert into the
space (m) to remove the battery.
(a)
(h)
(l)
(b)
(e) (c)
(d)
(k)
(g)
(f)
(i)
(j)
