8
English
Cleaning the shaver
1
2
1
1Insert the appliance
plug.
2
2Plug in the adaptor.
Remove any soap or water on
the shaver if it has been
washed with hand soap or
any other detergent.
•
3
3Remove the
protective cap and
then attach the
shaver.
Turn the shaver off before
attaching.
Check that the outer foil is not
deformed or damaged when
you are attaching the shaver.
•
•
4
4Press [SELECT] to select the course.
Each time you press [SELECT], the course changes from “Clean/
Dry/Charge” “Clean/Dry” “Dry/Charge” “Dry” “Charge”.
The courses start approximately 6 seconds after they are
selected.
The course will be aborted if the power is cut off. In this case,
perform the course again from the beginning.
Do not detach the detergent cartridge or the water tank as the
cleaning liquid may spill causing a malfunction.
•
•
•
•
Course
Course selection indications On shaver
Course completion summary
On recharger Changeable course
halfway through
On recharger On shaver Time required
(guide)
[In the low
temperature]
CLEAN DRY
CHARGE
CLEAN DRY
CHARGE
1Charge *2345 Glows Blinks 1 hour
2 Clean/Dry/
Charge 3Glows while
charging Blinks 2 hours [+30 min]
3Clean/Dry 2–– 1 hour [+30 min]
4Dry/Charge 235 Glows while
charging Blinks 2 h 40 min
5Dry 234 –– 1 h 40 min
*The lamp goes out in 6 seconds.
1
ES8109_USA.indb 8 2007/07/25 13:23:20