Panel Switches/ESP
Tactile Sheet
Type: ESP
The part of switch is designed for thin and small electronic devices such as mobile phones.
Creates thin push switches when combined with fixed contacts on a PWB.
■Features
●Resistant to environmental degradation:
1)Diaphragms with a center hole ensure contact stability.
2)
●Metal diaphragm creates a thin profile and lightweight.
●Sharp
●SMD available by using roll packaging (refer to the diagram below).
Roll Dimensions in mm (not to scale)
Packing form
φ300
φ150
■Specifications
| Diaphragm | φ 5 | φ 4 |
|
|
|
|
| Operating Force | 1.0 N, 1.6 N, 2.0 N | 1.0 N, 1.6 N, 2.0 N |
|
|
|
|
Mechanical | Push Travel | 0.25 mm±0.10 mm | 0.15 mm±0.08 mm |
|
|
|
|
| Height of Diaphragm: HD | 0.35 mm±0.08 mm | 0.28 mm±0.08 mm |
| (Including an actuator) | (0.58 mm±0.2 mm) | (0.51 mm±0.2 mm) |
| Operating Life | 500000 cycles | 500000 cycles |
|
|
|
|
Endurance | Operating Temperature Range | ||
|
|
|
|
| Storage Temperature Range | ||
|
|
|
|
Note: The above specifications are typical.
■Recommended Contact Pattern
Surface treatment: Ni plating + Au plating
|
|
| φ |
|
|
| 2 |
|
|
| . |
| φ |
| 3 |
|
|
| |
| 3. |
| |
φ |
| 8 |
|
|
|
| |
6.2 |
|
|
Copper foil
Surface treatment: Ni plating + Au plating
φ | |
φ . | |
2 | 1 |
8 | |
. |
|
8 |
|
φ5. |
|
2 |
|
Copper foil
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. |
|
Should a safety concern(a) φ5ariseDiaphragmreg rding this product, please be sure to contact us immediately. | Feb. 2009 |
(b) φ4 Diaphragm |