S P E C F I L E
Ceiling mount bracket for high ceilings
ET-PKE2000
Description This ceiling mount bracket is to be used when mounting home cinema projectors to the ceiling.
Specifications Vertical correction angle: | +5°, |
Horizontal slant correction angle: | ±10° |
Horizontal turn correction angle: | ±5° |
Dimensions (W x H x D): | 468 x 418 – 498 x 195 mm |
| |
Weight: | 3.0 kg (6.6 lbs) |
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Parts | Attachment plate | 1 |
| Projector mount bracket | 1 |
| Adjuster pole A | 1 |
| Adjuster pole B | 1 |
| Angle adjuster A | 1 |
| Angle adjuster B | 1 |
| Safety fitting A | 1 |
Safety fitting B | . . . . . 1 |
Safety fitting C | . . . . . 1 |
. . . . 19 | |
. . . . 10 | |
Wire rope | . . . . . 1 |
Flat wire clip | . . . . . 2 |
Clamp tube | . . . . . 2 |
C a u t i o n :
•All mounting work must be done by a qualified technician.
•Ensure that the mounting (ceiling) area has sufficient strength.
•Read the enclosed mounting instructions carefully before starting the mounting procedure.
•When the system is no longer to be used, have a qualified technician promptly remove and dispose of it.
•Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool should be used.
Dimensions
Illustration shows the
Attachement plate
449369– | inAdjustable steps(25/32˝)mm20 | Ø49 |
Ø43
191 70PT-AE2000
|
65
Attachment plate
Ø9.5 (3/8˝)
Ø8.5 | |||
|
|
| |
|
|
| (11/32˝) |
110
140
160
20
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
As of September 2007 |
| < 1 > |