Features of this product

Easy setup and improved serviceability

▶▶Outputs the image, sound, ethernet, and

serial control signals digitally by using one cable with CAT5e or higher grade to the projector*1 at a distance up to 100 m (328'11").

*1: Supported only when the interface box is connected to a

DIGITAL LINK compatible projector.

▶▶The light-weight and compact-size body is achieved that can be easily attached to the rack or the underside of the tabletop of the meeting desk.

Quick Steps

For details, refer to the corresponding pages.

1.Set up the interface box. ( page 15)

2.Connect the interface box and the projector. ( page 18)

User-friendly interface

▶▶Both the projector and the interface box

can be operated by using the remote control of the projector*1. Even the interface box is installed at a separate place from the viewing location, switching the input signal and adjusting the image are possible.

*1: Supported only when the interface box is connected to a DIGITAL LINK compatible projector.

Improvement of the connectivity

▶▶Analog inputs as well as the HDMI terminal are converted and output digitally. Therefore, transfer is possible without dropping the picture quality.

3.Connect with other devices. ( page 18)

4.Connect the AC adaptor. ( page 23)

5.Switch on the interface box.

( page 24)

6.Select the input signal. ( page 25)

ENGLISH - 9