V. ASSEMBLY

Attaching or removing bit

Note: When attaching or removing a bit, be sure to set the Forward/Reverse lever to its cen- ter position (switch lock).

This tool is equipped with a keyless drill chuck.

1.Attachment

Insert the bit and turn the lock collar clockwise (looking from the front) to tighten.

2

1

Lock collar

2. Removal

Turn the lock collar counterclockwise (looking from the front), then remove the bit.

1

2

3.Storage

Keep the bit in bit holder when not in use. Remove the battery pack to expose the bit storage compartment inside the handle hous- ing.

A bit up to 50 mm (1-31/32 inch) long can be stored here.

Note: If excessive play occurs in the chuck, secure the drill in place and 1 open the chuck claws by turning the lock collar and

2tighten the screw (left-handed screw) with a screwdriver by turning it counter- clockwise (viewed from the front).

1

2

Attaching or removing battery pack

1.To connect the battery pack:

Insert the battery pack. It snaps into place to indicate proper connection.

2.To remove the battery pack:

Press the two buttons on the sides of the bat- tery pack. Slide the battery pack out of the tool body.

VI. OPERATION

Switch and Forward / Reverse lever Operation

(Forward ( ), Switch lock, Reverse ( )) CAUTION: Do not operate Forward/Reverse

lever until the chuck comes to a com- plete stop. Shifting during rotation of the chuck may damage the tool.

Forward Rotation Switch Operation

1.For forward rotation, set the lever to forward.

2.Depress the trigger switch slightly to start the tool slowly.

3.The speed increases with the amount of depression of the trigger for efficient tightening of screws and drilling. The brake operates and the chuck stops immediately when the trigger is released.

4.After use, set the lever to its center position (switch lock).

Reverse Rotation Switch Operation

1.For reverse rotation, set the lever to reverse. Check the direction of rotation before use.

2.Depress the trigger switch slightly to start the tool slowly.

3.After use, set the lever to its center position (switch lock).

Speed Selection

Choose a low or high speed to suit the use.

The more the speed control trigger is pulled, the higher the speed.

CAUTION: Check the speed selector switch before use.

— 7 —

Page 6 Page 8
Page 7
Image 7
Panasonic EY6432, EY6405, EY6409 manual Assembly, VI. Operation
Page 6 Page 8

EY6432, EY6409, EY6405 specifications

Panasonic has long been recognized for its commitment to quality and innovation in the realm of power tools, and the EY6405, EY6409, and EY6432 models exemplify this dedication. These tools are designed to meet the demanding requirements of both professional tradespeople and DIY enthusiasts, delivering performance, durability, and efficiency.

The EY6405 is a lightweight and compact cordless drill that boasts a powerful 18V lithium-ion battery. Its ergonomic design allows for comfortable handling during extended use, while the variable speed control provides versatility for a range of applications. This model features a 2-speed gearbox, enabling users to switch between high speed for drilling in wood and low speed for heavier applications such as metal drilling. Additionally, it incorporates a built-in LED light, enhancing visibility in dimly lit spaces.

On the other hand, the EY6409 is a robust impact driver that takes versatility to another level. With a high-torque output, it is ideal for driving large screws and bolts with ease. It also features an innovative brushless motor that enhances energy efficiency, thus maximizing runtime and reducing maintenance needs. The EY6409 further supports multiple torque settings, allowing users to adjust the power output depending on the task at hand, ensuring precision and control.

The EY6432 stands out as a multi-functional tool, merging the capabilities of both a jigsaw and a circular saw in one versatile design. This model is equipped with a powerful motor that delivers exceptional cutting performance across various materials, from wood to metal. The unique blade changing system enables quick and effortless swaps, minimizing downtime. Furthermore, the ergonomic grip and weight distribution enhance user comfort, making it suitable for prolonged use.

All three tools benefit from Panasonic's advanced battery technology, ensuring longer run times and shorter charging periods, which is critical for professionals in the field. Moreover, their durable construction and reliable performance make them suitable for even the toughest job sites.

In summary, the Panasonic EY6405, EY6409, and EY6432 each bring distinct advantages to any toolkit. Whether it’s drilling, driving, or cutting, these tools combine cutting-edge technologies with user-friendly features to support a wide array of tasks, making them invaluable assets for both professional and amateur craftsmen alike. With Panasonic’s ongoing commitment to innovation, these models are sure to be at the forefront of power tool advancements, catering to the needs of today’s users.
Top Page Image Contents