Ref. No. 2C | Procedure 2A → 2B → 2C | Removal or attachment of the Gear Box Block. | |
|
| (Removal) | |
|
| 1. | Turn the thrust plate to remove. |
|
| 2. | The internal parts of gear box block can be removed one after |
|
| another. (See Fig. 8) | |
(Attachment)
1. If the lock ring comes out, reassemble in the correct direction. (See Fig. 9)
2. Start from inserting 6 pins into the driving block as shown in the Fig. 10.
3. Assemble the other parts in reverse order as shown in the Fig. 8.
4. Install steel balls, pins and clutch springs into 6 holes. (See Fig. 11)
NOTE :
Carrier, Ring gear, and Clutch plate have their own correct directions for proper assembly.
Fig. 8
Fig. 9 | Fig. 11 |
|
Fig. 10
5