![](/images/new-backgrounds/1328627/3286275x1.webp)
3 DISASSEMBLY/ASSEMBLY INSTRUCTIONS
■HOW TO DISASSEMBLE KEYLESS CHUCK.
Ref. No. 1A | Procedure 1A | Removal of the Keyless Drill Chuck. |
|
| 1. Set the clutch handle to position 1 and select "LOW" position. |
|
| 2. Turn the lock collar counterclockwise direction to open the chuck |
|
| jaws. |
|
| 3. Use a screwdriver to turn the chuck fastening screw inside the |
|
| chuck clockwise direction of the arrow, and remove the screw. (See |
|
| Fig. 1) |
|
| NOTE : |
|
| If the chuck fastening screw will not come loose, insert the |
|
| allen wrench into the chuck and lightly tap in the clockwise |
|
| direction with a hammer to tighten the chuck, and then loosen |
|
| the chuck fastening screw. (See Fig. 2) |
|
| 4.Insert the allen wrench into the chuck, and turn counterclockwise |
| Fig. 1 | direction in the arrow with holding the unit by the vise to remove |
|
| the chuck. (See Fig. 3) |
Fig. 2
Fig. 3
3