–Where water may make the unit wet
–Where there is vibration
–Inside a vehicle
≥Refer also to the owner’s manual of the digital camera.
≥When the unit is not going to be used for a prolonged period, we recommend storing with a desiccant (silica gel). Failure to do so may result in performance failure caused by mold, etc. It is recommended that you check the unit’s operation prior to use.
≥Do not leave the lens in contact with rubber or plastic products for extended periods of time.
≥Do not touch the lens contact point. Doing so can cause failure of the unit.
≥Do not disassemble or alter the unit.
Do not use benzine, thinner, alcohol or other similar cleaning agents to clean the lens glass or exterior cabinet.
≥Using solvents can damage the lens or cause the paint to peel.
≥Wipe off any dust or fingerprints with a soft, dry cloth.
≥Use a dry, dust cloth to remove dirt and dust on the focus ring.
≥Do not use a household detergent or a chemically treated cloth.
Troubleshooting
A sound is heard when the camera is turned on or off.
A sound is heard from the lens when taking a picture of a bright subject such as when outdoors.
≥This is the sound of lens or aperture movement and is not a malfunction.
9
