Installing Software
15
Note:
•If the program does not automatically start, click [Start], click [Run...], click [Browse...], and select the CD/
DVD drive containing the installation software, double-click on “CDRun.exe” in the root directory to
manually start the installation routine, then click [OK].
4Select your scanner.
5Select the [All Drivers & Utilities] from the [Installation] list.
6Follow the instructions on the screen.
7Turn on the power of the scanner.
8Follow the instructions of the hardware wizard to complete the installation.
Custom installation
Each driver, utility, and manual can be installed using the Custom installation selection, as required.
1Turn off the power of the scanner (only when installing Device Driver).
2Insert the CD-ROM into your CD/DVD drive on your computer.
3If you have a feature called ’Autorun’ activated, this will start the installation process
automatically
Note:
•If the program does not automatically start, click [Start], click [Run...], click [Browse...], and select the CD/
DVD drive containing the installation software, double-click on “CDRun.exe” in the root directory to
manually start the installation routine, then click [OK].
4Select your scanner.
5Select the [Custom] from the [Installation] list.
6Select a driver, an utility, or a manual.
7Follow the instructions on the screen.