Control Panel and Status Indicators

2

1

3 4

ADouble Feed Skip key (DFS)
If you press this key when a double feed occurs, the sheet that was detected as a double feed will
be scanned, and scanning will continue.
BStart/Stop key (Start/Stop)
•If you set [Wait Key] for "Manual Feed Mode"*1 in your application software, pushing this key
starts scanning.
•During scanning, pushing this key stops scanning.
•If you press this key when a double feed occurs, the sheet that was detected as a double feed
will be ejected from the scanner without being scanned. Scanning will stop.
CReady indicator (Ready)
Shows the scanner's status.
DError indicator (Error)
Lights when an error occurs.
*1 For details on "Manual Feed Mode", refer to the help for ICP.
16 Operating Manual
Location of Controls