FStart/Stop button
•If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button
starts scanning. For details about "Manual Feed Mode", refer to the Image Capture Plus,
TWAIN, or ISIS help.
•During scanning, pushing this button stops scanning.
•If you press this button after a double feed is detected and scanning has been paused, the
document (or documents) detected as a double feed will be ejected from the scanner without
being scanned. Scanning will stop.
n KV-S1057C and KV-S1027C only
GLCD
HOK button
If you are using the scanner with Image Capture Plus, you can perform a push scan using the LCD.
Registered jobs are displayed on the LCD. Use the cursor button (D) to select a job. Also, error
codes and messages corresponding to the scanner status are displayed on the LCD.
n KV-SL1066, KV-SL1056, KV-SL1055, KV-SL1036 and KV-SL1035 only
I7-segment LED
If you are using the scanner with Image Capture Plus, you can perform a push scan using the
7-segment LED. A registered job number is displayed on the 7-segment LED. Use the cursor button
(D) to select a job.
Operating Manual 15
Location of Controls