Cleaning the Inside of the Scanner
Note
•Clean the inside of the scanner when approximately 6,000 sheets have been scanned. The time for
cleaning may differ depending on documents you scan. To maintain proper scanning, clean the scanner
parts frequently.
•Clean the rollers if paper jamming or double feeding occurs frequently.
•If double feed detection does not function properly, clean the double feed detectors.
•Clean the scanning glasses when vertical streaks appear on the scanned images.
•Be careful not to damage any parts of the unit.
1. Prepare the following cleaning supplies.
Soft and dry cloth Used to clean the conveyor and scanning glasses.
Thin cotton swab Used to clean the double feed detectors and the starting
sensors.
Roller cleaning paper (KV-SS03)
Used to clean the rollers. Use of the roller cleaning paper is
recommended. If you do not have the roller cleaning paper, use
a soft cloth with a small amount of isopropyl alcohol or water.
Do not use commercially available cleaners, detergent,
thinner, or benzine. (Doing so may cause deformation,
discoloration or damage.)
2. Press the ADF door release (A), and open the ADF door (B).
1
2
Operating Manual 51
Care and Maintenance