Remote Operation

Operating from a remote location

The following operations can be performed from a remote location using a touch tone telephone.

Set the unit to the TAD/FAX mode before going out (p. 84).

Dial Key

Remote command

Page

Dial Key

Remote command

Page

 

 

 

 

 

 

 

0

Skips the greeting message

97

 

4

Erases a specific message

96

 

 

 

 

 

 

 

1

Repeats a message

95

 

5

Erases all messages

96

 

 

 

 

 

 

 

2

Skips a message

95

8

0

Changes to the TEL mode

97

 

 

 

 

 

 

 

4

New message playback

95

8

1

Turns ON message transfer for

97

 

 

 

incoming messages

5

All message playback

95

 

 

 

 

 

 

 

8

2

Turns OFF message transfer for

97

 

 

 

6

Room monitor

96

incoming messages

 

 

 

 

 

 

 

 

 

 

8

3

Turns ON pager call for incoming

97

7

Re-records a greeting message

96

messages

 

 

 

 

 

 

 

 

 

9

Stops re-recording of a greeting

96

8

4

Turns OFF pager call for

97

message

incoming messages

 

 

 

 

 

 

 

 

 

 

 

 

Remote operation card

Please cut out and carry this card for assistance when using the remote operation.

Device

Answering

 

 

Answering Device

 

Notice of Remote Operation

Remote Operation

 

 

 

 

 

 

 

1.Call your unit.

2.Enter the remote operation ID

during the greeting message.

The new recorded messages will be played automatically.

3.Press the remote command key(s) (see the reverse side) within 10 seconds.

If there are no new messages, press the remote command key(s) within 4 seconds.

or

Wait for 4 seconds, and all the recorded messages will be played back.

here Fold

The remote operation is available only from a touch tone telephone when the unit is in the TAD/FAX mode.

When the unit is in the TEL mode, call your unit and wait for 15 rings. The answering device will temporarily answer the line. Enter the remote operation ID during the greeting message. The unit will switch to the TAD/FAX mode.

When you press any key, press firmly.

To send a document, press

9 . When a fax tone is heard, start transmission.

93