50
Receiving Faxes
Pager call - when the unit receives a fax or !
voice message!
This feature allows your unit to call your pager when your unit receives a fax document or an
incoming voice message.
1Press p.
Display:
2Press #, then 70.
3Press +or -to select “ON”.
●
If this feature is not required, select “OFF”.
4Press w.
5Enter your pager number up to 30 digits.
Example:
6Press w.
7Enter your pager access code up to 10 digits
if required.
Example: PIN=12345678
NO.=12025551234
PAGER CALL
MODE=ON [±]
PAGER CALL
MODE=OFF [±]
SYSTEM SET UP
PRESS NAVI.[I H]
Note:
●
If
you have subscribed to a Caller ID service,
instead of the message you entered in
step 8, your pager will display the caller
’s
telephone number, followed by “11” or “22”.
11:
When your unit receives a voice message.
22: When your unit receives a fax document.
●
If you have not entered a message in step 8,
your pager will only display “11” or “22”.
8Press w.
●The default code 07734 will
show “Hello!” on your pager.
●If you want to change this
message, enter your message
up to 30 digits.
9Press w.
●The unit will dial the stored
number.
10 Check that your pager received
the pager test call.
11 Press NO.
PAGER TEST
MSG.=07734
Extension telephone!
To the same line
Extension telephone
Note:
●You can change the fax activation code in
feature #41 (p. 72).
If you use the fax machine with an extension telephone, you can receive fax documents using
the extension telephone. You do not have to press jon the fax machine.
Important:
●
Use a touch tone telephone as the extension telephone and enter the fax activation code firmly.
1When the extension telephone rings, lift the
handset of the extension telephone.
2When:
— document reception is required,
— a fax calling tone (slow beep) is heard, or
— no sound is heard,
press *9 (pre-selected fax activation
code) firmly.
3Hang up the handset.
●The fax machine will start reception.