Panasonic KX-FPG176 Start transmission., Transmission is complete., Start reception., Transmission has failed., Transmission has been interrupted.

Feature & Display
Features Summary
73
Code Settings How the unit operates
1. Follow steps 1 and 2 on page 72.
2. Enter a 3-digit number except a
number using digits 0 or 7.
3. Press w .
4. Press
p .
#51
Setting the mailbox 1 password
If you wish to prevent other users
from retrieving messages, program
a password for mailbox 1.
BOX1 PASSWORD
ID=
ID=555
1. Follow steps 1 and 2 on page 72.
2. Enter a 3-digit number except a
number using digits 0 or 7.
3. Press w .
4. Press p .
#52
Setting the mailbox 2 password
If you wish to prevent other users
from retrieving messages, program
a password for mailbox 2.
BOX2 PASSWORD
ID=
ID=555
#46
Setting the friendly reception
To receive a fax automatically when
you answer a call and hear a fax
calling tone (slow beep).
FRIENDLY RCV
MODE=ON [±]
ON
OFF
“ON”: You do not have to press
jfor fax reception.
Voice guidance examples:
“ Start transmission. ”
“ Transmission is complete. ”
“ Transmission has failed. ”
“ Transmission has been
interrupted. ”
“ Start reception. ”
etc.
Setting the fax voice guidance
If you wish to hear the voice
guidance (see right) at each fax
transmission/reception, set this
feature to “ON”.
●To hear the voice guidance only
when fax transmission/reception
fails, select “ERROR”.
FAX GUIDANCE
MODE=ON [±]
#47
ON
OFF
ERROR
(The default setting is in bold type.)
“16s”: Up to 16 seconds
“60s”: Up to 60 seconds
●See page 55 for details.
CHECK
RECORD
ERASE
CHECK
RECORD
ERASE
Changing the recording time for
your own TAD/FAX greeting
message
GREETING TIME
MODE=16s [±]
16s
60s
#55
Greeting message for mailbox 1
(checking, recording or erasing)
BOX1 GREETING
CHECK [±]
See page 63 for details.
#56
Greeting message for mailbox 2
(checking, recording or erasing)
BOX2 GREETING
CHECK [±]
See page 63 for details.
#54