3. Help
21
Detailed operating instructions are on the CD-ROM.
“RX Memory Full”LThe memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper or remove the jammed paper.
LIf feature #442 is set to “Always”,
– check the connection between the computer and the unit.
– check the computer is turned ON.
LIf feature #448 is set to “On”,
– view, print or save the received fax documents, and then erase the
unnecessary documents.
– turn the setting to “Off”. The fax documents stored in memory will be
printed automatically.
– set feature #449 to “On”, and then print the received fax documents.
“Same name already
exists.”
LThe same file name already exists in the SD card folder. See the other
displayed message instructions to continue saving the data.
“Scanner Position Error”LThere is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“SD Card is pulled out”LThe SD card has been removed from the unit. Reinsert it.
“SD Card not installed.”LThere is no SD card inserted in the unit. Insert one.
“SD Card Write
Protection”
LThe write-protect switch of the SD card is in the lock position. Unlock the
switch to allow write access.
“SD Size Over”LThere is no space to save new data on the SD card. Erase unnecessary
data.
“Self Calibration”LThe unit is changing the colour calibration. Wait for a while.
“Transmit Error”LA transmission error occurred. Try again.
“Toner Cartridge Not
Installed”
LThe toner cartridge is not installe d. Install it.
“Tray #2 Left Cover
Open”
LThe left cover of the optional input tray is open. Close it.
“Waste Toner Not
Installed”
“Waste Toner Cartridge
Not Installed”
LThe waste toner cartridge is not installed. Install it.
Display Cause & Solution
MC6040_6260CX-PNQW1377ZA-QRG-en.book Page 21 Wednesday, July 30, 2008 10:24 AM