Panasonic KX-NCP, KX-TDE 4.2 Starting CA Web Manager

Note

When using a KX-TDE Series PBX, you must also click When using TDE...:

Enter the IP address of the PBX’s IPCMPR card, the PBX’s administrator password (the same

password used to log on to the Maintenance Console), and the Maintenance Console’s Port Number.

Click OK.

Once these settings are made, they are saved, and each time CA Server starts it will automatically attempt

to connect to the PBX if no setting changes are made.

Once CA Server is running on your computer, an icon will appear on the computer’s task tray.

Hovering your mouse over the icon will display a status message for CA Server. The icon will also turn red if

there is an error, or if CA Server is not functioning properly.

Right-clicking the icon brings up a menu where you can reset the administrator password, open CA Web

Manager, or terminate the CA Server program.

It is important to always use the latest version of CA Server to ensure all features work properly. Contact your

dealer for more information.

4.2 Starting CA Web Manager

1. Start a web browser program.

2. In the browser’s address bar, enter the CA Server’s IP address and port number for CA Web Manager

using the following format:

http://[IP address of the computer running CA Server]:[Web manager port number specified in CA

Server setup]

For example, if the IP address of the computer running CA Server is [101.155.0.1] and the specified Web

manager port number is [8080], the address entered would be the following:

http://101.155.0.01:8080

If you are unsure of the IP address of the computer running CA Server, contact your network’s

administrator.

There are three methods:

Quick Reference Guide 13

4.2 Starting CA Web Manager