Panasonic KX-PRLA20 installation manual Charge for about 7 hours, Base unit, Handset

Installation

RDo NOT use Alkaline/Manganese/Ni-Cd batteries.

RConfirm correct polarities (, ).

Charge for about 7 hours.

R Confirm “Charging” is displayed (2).

R When the batteries are fully charged, “Fully charged” is displayed.

1 2

Note:

RIf the batteries are fully charged, but the operating time seems to be shorter,

clean the battery ends (, ) and the charge contacts with a dry cloth and charge again.

Registering a handset to a base unit

1Base unit:

Press and hold MN for about 5 seconds.

R If all registered handsets start ringing, press MN again to stop, then repeat this step.

2Handset:

Place the handset on the base unit or charger, then wait until a long beep

sounds and is displayed.

Note:

RIf an error tone sounds, or if is displayed, register the handset according to the base unit’s operating instructions.

Display language

1MMENUN (right soft key) #110

2MbN: Select the desired setting. a MSAVEN a MOFFN

For assistance, please visit http://www.panasonic.com/help 3