33
Advanced Operation
Tom Jones
0987654321
F
=Edit
H
=Save
Tom Jones
0987654321
1Press (FUNCTION/EXIT/CH).
2While the arrow points to “Save
directory”, press FWD/EDIT á(Yes key).
•The display shows the number of stored items
in the directory.
3Enter a name, up to 15 characters using
the dialing buttons (p. 34).
•To move the cursor, press BACK Üor
FWD/EDIT á.
•If a name is not required, press Ö(Next key)
and go to step 5.
4Press Ö(Next key).
5Enter a phone number, up to 22 digits.
•If you misdial, press (CLEAR). Digits are
erased from the right. To erase all digits, press
and hold (CLEAR).
6Press Ö(Next key).
•If you want to change the storing name or
number, press Ñ(Edit key) repeatedly to
reach the desired display and change it.
7Press FWD/EDIT á(Save key).
•A beep sounds.
•
To continue storing other items, repeat from step 2.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 44).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If the display shows “Directory full” in step 2, press (FUNCTION/EXIT/CH).
To erase other stored items from the directory, see page 39.
•
After the maximum of 50 items has been stored, “Directory full” is also displayed.
•If 3 beeps sound and the display shows “Save error”, move closer to the base
unit and start again from step 1.
H
Save directory
Ringer volume
GF H
=Yes
Directory=
20 items
Enter name
IH G
=Next
Enter name
Tom Jones
IH G
=Next
Enter phone no.
0987654321
IH G
=Next