Liquid damage
Problem Cause/solution
Liquid or other form of
moisture has entered the key
detector.
RRemove the battery from the key detector
and leave to dry for at least 3 days. After the
key detector is completely dry, insert the
battery. If the key detector does not work
properly, contact an authorized service
center.
Caution:
RTo avoid permanent damage, do not use a microwave oven to speed up the
drying process.
For your safety
To prevent severe injury and loss of life/property, read this section carefully before
using the product to ensure proper and safe operation of your product.

WARNING

CR coin cell lithium battery
RThe battery poses a choking hazard. Keep it out of reach of children. If the
battery is accidentally swallowed, consult a doctor immediately.
RDo not recharge, disassemble, remodel, heat or throw it into fire.
RDo not touch the terminals ( and ) with metal objects.
RRisk of explosion if battery is replaced by an incorrect type.
Dispose of used battery according to local regulations.
RIf any electrolyte should come into contact with your hands or clothes, wash it off
thoroughly with water.
RIf any electrolyte should come into contact with your eyes, never rub your eyes.
Rinse your eyes thoroughly with water, and then consult a doctor.

CAUTION

CR coin cell lithium battery
RUse only the battery specified.
RInsert the battery correctly.
RDo not leave the battery in an automobile exposed to direct sunlight for a long
period of time with the doors and windows closed.
RRemove the battery if you do not use the product for a long period of time. Keep
it in a cool, dark area.
7
Installation
TGA20(en-en)_1201_ver022.pdf 7 2012/12/01 19:54:54