1Press [RADIO, ALARM SET].
•If you do not proceed to the next step
within 5 seconds, the display will return
to the current time.
2Adjust the alarm time by pressing
[+, TUNE/CLOCK] or [–, TUNE/CLOCK].
•Pressing and holding [+]or [–]changes
the time faster.
3Press [RADIO, ALARM SET].
•The radio will automatically turn on.
4Press [FM/AM, RADIO] to switch between FM and AM.
5Press the desired memory button ([M1]to
[M5]).
OR
Tune in to the desired station by pressing
[+, TUNE/CLOCK] or [–, TUNE/CLOCK].
6Adjust the volume by using the VOLUME
control.
7Press [RADIO, ALARM SET] to save the radio alarm time and the
station.
•The selected station stops flashing and disappears.
•The selected alarm time returns to the current time.
•“” is displayed while the radio alarm is turned on.
•The radio will turn off.
•The radio will automatically turn on at the set time and will turn off
after 1 hour.
•You can exit alarm setting mode any time by pressing [OFF].
•To change only the radio alarm time, repeat steps 1 to 3, then
press [RADIO, ALARM SET].
•If a power failure occurs, the radio alarm time and station preset will
be retained for about 10 minutes.
To confirm the radio alarm time and station
Press [RADIO, ALARM SET].
•The alarm time and the station will be displayed for about 5 seconds.
4
Using the Alarms Section 4
The charger unit features an alarm clock. You can set the alarm to
play the radio or to sound a buzzer at a set time.
The radio alarm and the buzzer alarm can be set separately.
For assistance, please call: 1-800-211-PANA(7262)
VOLUME Control
[OFF]
[+,
-
, TUNE/CLOCK]
[FM/AM, RADIO]
Memory Buttons
([M1], [M2], [M3], [M4] and [M5])
[SNOOZE/MUTE]
[RADIO, ALARM SET]
[BUZZER, ALARM SET]
[ALARM ON/OFF]