4
Registering a handset to the base unit
1Base unit:
NKX-TGP500 series
Press and hold {ALL} for about 4 seconds until the STATUS
indicator flashes in red.
NKX-TGP550 series
Press and hold {ALL} for about 4 seconds until the registration tone
sounds and the STATUS indicator flashes in red.
LIf all registered handsets start ringing, press the same button to
stop. Then repeat this step.
LThe next step must be completed within 90 seconds.
2Handset:
Press {OK
L
}, then wait until a long beep sounds.
Note:
LIf an error tone sounds, or if _ is still displayed, register the handset
according to the registering section of the base unit’s User Guide on
the Panasonic Web site. See page1 for Panasonic URL.
Display language
1{MENU} (center of joystick) i {#}{1}{1}{0}
2{V}/{^}: Select the desired setting.
3Press down the center of the joystick to save. i {OFF}