Voice Mail Tone

If your voice mail service sends a voice mail tone after a new message has finished recording, set to “ON”. “ ” icon will flash on the display if a message was recorded in your mailbox. You will hear a series of voice mail tones then a dial tone after lifting the handset.

(Contact your service provider about your service.) Set to “OFF” when:

—you do not subscribe to a voice mail service.

—your voice mail service does not send a voice mail tone, or —the unit is connected to a PBX.

Your phone comes from the factory set to “ON”.

Make sure that the handset is on the cradle.

Preparation

1

2

3

4

5

Press [FUNCTION/EXIT].

Scroll to “VM TONE DETECT ?” by pressing [] or [].

Press [ENTER].

Select “ON” or “OFF” by pressing [] or [].

Press [ENTER].

SAVE PHONEBOOK ?

VM TONE DETECT ?

:ON

SAVED

• You can exit the programming mode any time by pressing [FUNCTION/EXIT].

For assistance, please call: 1-800-211-PANA(7262)

13

Page 13
Image 13
Panasonic KX-TSC11B Voice Mail Tone, Save Phonebook ? VM Tone Detect ? Saved, Make sure that the handset is on the cradle