Using the Control Panel
The Control Panel allows you to set only Auto LF,
Graphic Direction, Page Length, Emulation and
Download buffer.
If there is any paper loaded, you will get a print out of
the current settings automatically.
1. Turn the power on while pressing
LOAD/PARK
.
Both font indicators will be blinking.
You have entered the Initial Setup mode.
2. Press and release

FONT

.
Select the desired item according to the FONT
indicators (A) condition. The item will switch each
time you press FONT.
Refer to the table on the next page.
A
3. Press and release
ON LINE
.
Change the setting according to the ON LINE
indicator (A) condition. The setting will switch each
time you press ON LINE.
Refer to the table on the next page.
If you want to change the settings of some more
items, perform steps 2 and 3.
A
4. Press
LOAD/PARK
.
You have exited the Initial Setup mode.
Operating Instructions 27
Using the Control Panel
Using the Control Panel