Watching TV
Antenna / Cable service without a box
Initial setting
1.Connect coax
Connect a COAX wire from either an antenna or Basic Cable service to the TV's "ANTENNA/CABLE IN" screw terminal.
| ANTENNA/ | Antenna | |
TV | CABLE IN | ||
|
2.Scan the channel
| Setup > ANT/Cable setup > ANT in, Auto program |
MENU |
1.Select Programming source Cable or Antenna in Ant in.
2.Select Auto program and select scan mode
(All channels / Analog only / Digital only).
3.Start scanning.
*If at the end of the scanning no channels are found, then check: Antenna's position - or Availability of Cable service.
Cable, Satellite or Fiber services with a box are typically connected to the TV's A/V inputs, preferably HDMI, for best HD picture. In such a case, the channel scanning is not needed (set ANT IN to Not used).
12