Watching TV
Cable / Satellite / Fiber with a box
Initial setting
1.Connecting
Select the wiring method connecting your box to the TV, AV IN or Antenna/Cable in.
Tip: HDMI will provide the best HD picture
2.Change INPUT
INPUT
Press the INPUT button to select the proper connection. Wait 2 seconds.
3.Power on your Cable , Satellite or Fiber box
Use the box's remote control to change channels.
*If the box is connected to the TV using a COAX cable (Antenna/Cable in), then set the TV channel to CH3 or CH4. Note that the picture will not be in HD.
*CC/SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.
*If your box is a high definition, then check that it is outputting 720p or 1080i signal.
Tip: press the TV's INFO button to verify.
*Check your box "aspect" or "format" settings. It should be set to 16:9, Widescreen or FULL.
*If the audio volume is too low, check the box's audio settings.
*Contact your Cable or Satellite provider for instructions on any box settings.
11