Setting up the telephone
Connecting the cords
Connect to jack
from distribution block
Connect to receiver
ATTENTION Before attempting to carry out any work on the telephone, ensure that the line cord is unplugged from the wall socket.
To remove any of the cords, squeeze the release latch on the plug and gently pull the plug from the socket.
Connect the handset cord to the jack labelled with the telephone icon and route the cord as shown.
Route the line cord through the stand and connect the cord to the telephone jack that is marked with the jack icon.
Attach the stand using the slots on the back of the telephone. Once the above work is complete, plug the line cord back into its wall socket.
Page 4 Enterprise Edge M7100 Quick Reference Guide
