- 28 - - 13 -
Power
Motor Protector
Height Adjust Cord Length
120V AC (60Hz)
Yes Auto 50 Ft. (15.25m)
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Voltaje
Protecto r d e Adjust de nivel
Extensión
motor
de cordón
120V AC (60Hz)
Si Auto 15,25 m (50 pi)
Alimentation Protecteur Réglage de la Cordon
du moteur hauteur des brosses d’alimentation
120 V c.a. (60 Hz)
Oui Auto 15,25 m (50 pi)
Cleaning Agitator
➢➢Clean agitator after every five uses
and every time the belt is replaced.
➢➢Remove lower plate.
➢➢Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
➢➢Remove agitator.
➢➢Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢➢Reinstall agitator and lower plate.
Replacing Agitator
➢➢When the bristles on the agitator are
worn so that they do not touch a card
held across the lower plate, the
agitator should be replaced.
➢➢Remove lower plate and agitator.
➢➢Position belt over belt pulley on the
new brush unit.
➢➢Reinstall agitator and lower plate.