Panasonic NN-CD989S manual To Use Timer Function, Press Timer 2 Set Desired Amount of Time

Operation & Hints

To Use Timer Function

This feature allows you to program the oven as a kitchen timer. It can also be used to program a standing time after cooking is completed and/or to program a delay start.

To Use as a Kitchen Timer

1 Press Timer

2 Set Desired

Amount of Time

Using Time/Weight Select Dial (up to 1 hour 30 minutes)

3 Press

Time will count down without operating oven.

To Set Stand Time

Set Desired

Cooking

Program

Press.	Set desired amount of	Press.
	stand time.	Cooking will start.
	(up to 1 hour 30 minutes)	After cooking, stand
		time will count down
		without oven operating.

To Set Delay Start

Set Desired

Cooking

Program

Press.	Set desired amount of
	delayed time.
	(up to 1 hour 30 minutes)

Press.

Delay time will count down. Then cooking will start.

NOTE:

1.When each stage finishes, a two-beep signal sounds. At the end of the program, the oven will beep five times.

2.If the oven door is opened during Stand Time, Kitchen Timer or Delay Time, the time on the display will continue to count down.

3.Stand time and Delay start cannot be programmed before any automatic Function. This is to prevent the starting temperature of food from rising before defrosting or cooking begins. A change in starting temperature could cause inaccurate results.

4.Timer can be set up to 1 hour 30 minutes.

24