Panasonic NN-ST656W Timer/Clock Setting, To Set Standing Time, To Set Delay Time, En-7, English

Models: NN-ST656W

1 13
Download 13 pages 25.7 Kb
Page 8
Image 8
Timer/Clock Setting

IP0539_38F90KP_Eng_0630 2006.6.30 12:48 Page 7

Timer/Clock Setting

This feature allows you to program standing Time after cooking is completed and to program the oven as a minute or a second timer or program delay start.

To use as a Kitchen Timer: Example: To count 5 minutes

 

 

 

 

 

 

 

 

 

 

 

 

5 times

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Press.

 

 

 

 

2. Set desired amount of time.

 

 

 

3. Press.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(up to 99 minutes and 99

 

 

 

Time counts down without

 

 

 

 

 

 

 

 

seconds)

 

 

 

operating oven.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To Set Standing Time:

 

 

 

 

 

 

Example: To stand for 5 minutes after cooking (3 mins. at P7)

 

 

 

 

 

 

 

3 times

 

 

5 times

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

1. Press 4 times.

2. Press 3 times.

3. Press.

4. Press 5 times.

Set the desired

 

 

Set desired amount

cooking program.

 

 

of starting time.

(See page 5 for

 

 

(Up to 99 minutes

directions.)

 

 

and 99 seconds.)

5.Press.

Cooking starts. After cooking, standing time will count down without operating oven.

To Set Delay Time:

Example: To start cooking 5 minutes later (3 mins. at P7)

5 times

 

 

 

 

3 times

 

 

 

 

 

 

 

 

 

 

 

 

1. Press.

2. Press 5 times.

3. Press 4 times.

4. Press 3 times.

5. Press.

 

Set desired amount

Set the desired

 

Delayed time counts

 

of delay time.

cooking program.

 

down. The cooking will

 

(up to 99 minutes

(See page 5 for

 

start.

 

and 99 seconds)

directions.)

 

 

NOTE:

1.If oven door is opened while Standing Time, Delay Time or Kitchen Timer has been set, the time in the display window will continue to count down.

2.Delay Time and Standing Time can not be programmed before any Auto control Function. This is to prevent the standing tem- perature of the food from rising before defrosting or cooking begins. A change in the starting temperature could cause in accurate results.

3.When using Standing time or Delay time, it's up to 2 Micro Power stages.

To Set Clock: Example: To set 11:25 a.m.

once

 

 

 

 

once

 

 

twice

 

 

 

5 times

 

 

1. Press once.

2. Enter time of day using the

Colon will blink.

number pads.

 

Time appears in the display

 

window; colon is blinking.

3.Press.

Colon stops blinking; time of day is entered and locked in the display window.

NOTE:

1.To reset time of day, repeat steps 1-3.

2.The clock will keep the time of day as long as oven is plugged in and electricity is supplied.

3.Clock is a 12-hour display.

4.Oven will not operate while colon is blinking.

- En-7 -

Page 8
Image 8
Panasonic NN-ST656W Timer/Clock Setting, To Set Standing Time, To Set Delay Time, To Set Clock Example To set 11 25 a.m