Panasonic PT-DW5100L specifications Parameter format, Command example

S P E C F I L E

DLP® Projectors

PT-DW5100/DW5100L

Parameter format

Parameter format	Size (Byte)	Difinition
<pl>	3 (1 or 2 bytes also	Dicimal without signs: 0-999 (000, 001, 002...999)
	possible when	Dicimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99)
	under control)		Callback from the projector is 3 Byte.
<off on>	1	0	= off, 1 = on
<input signal>	3	RG1 = computer 1, RG2 = computer 2, VID = video, SVD = S-Video,
		DVI = DVI
<installation>	1	0	= front, 1 = rear, 2 = ceiling and front, 3 = ceiling and rear
<language>	3	ENG = English, DEU = German, FRA = French, ESP = Spanish,
		ITL = Italian, JPN = Japanese, CHI = Chinese, RUS = Russian, KOR = Korean
<power condition>	3	000 = standby power off, 001 = standby power on
<lamp on time>	4	Decimal without signs: 0000-9999 hours
<lamp select>	1	0	= dual, 1 = single, 2 = lamp 1, 3 = lamp 2
<lamp power>	1	0	= high, 1 = low
<acctch>	4	Decimal without signs: 0000-9999 hours
<color temp>	2	1	= mid, 2 = high, 4 = user, 10 = default
<date>	9	y1y2y3y4m1m2d1d2w = year (y) month (m) day (d) day of week (w)
		Day of week: Monday = 1, Tuesday = 2, ... Sunday = 7
<time>	6	h1h2m1m2s1s2 = hour (h) minute (m) second (s)

NOTE: If a wrong command is received, the projector will send an ER401 command to the computer.

Command example

To set the on-screen display off, send the command as shown below.

STX	ADZZ ;	OOS :	30	ETX
Start	ID Address	Command	Parameter End

NOTE: When sending commands without parameters, a colon (:) is not necessary.

As of January 2009 < 17 >