Panasonic PT-F100NTE, PT-F100E manual Highland, Test Pattern

OPTION menu

			XGA MODE
HIGHLAND
			You can switch the setting between XGA and the
If you use the projector at high elevation, the HIGHLAND			wider setting, WXGA. Press I H to select the
setting need to be ON to set the fan speed high. Press			required option.
I H to select the required option.			BLACKBOARD
	OFF	The fan speed is low.
	ON	The fan speed is high.	You can exclude the BLACKBOARD in menu
			items of PICTURE MODE in PICTURE menu.
NOTE:			Press I H to select the required option.
•	At 1 400 m (4 593 ft) above sea level, the setting must		ON	Include the BLACKBOARD in menu
	be ON.			items.
•	The loudness of fan noise depends on the HIGHLAND		OFF	Exclude the BLACKBOARD in menu
	setting.			items.
			BACK COLOUR
TEST PATTERN
			You can choose a BLUE or BLACK screen for
You can use the 7 different test patterns to adjust the			when the projector is idle. Press I H to select the
			required option.
focus of the image. See “Lens shift and positioning” on
			VOLUME
page 18.
1. Press ENTER to display the test pattern 1.			You can adjust the volume of the built-in monaural
2. Press I H to select the required test pattern.
			speaker and VARIABLE AUDIO OUT terminal.
3. Adjust the focus with the Focus lever.
			I	Decrease
4. Press MENU or RETURN to return to the previous
			H	Increase
	menu, oar press repeatedly to escape the menu
			AUDIO BALANCE
	mode.
			You can adjust to hear the sound played equally
NOTE:
			through both right and left external stereo
• When the projector and/or the screen is tilted, adjust			speakers, or shift the balance so more sound plays
	the focus at the centre of the image. The upper and		through the left or right side.
	lower edge might be out of focus.		I	More sound plays through the left
•	When the image is distorted in keystone, adjust the
				side
	KEYSTONE in POSITION menu.
			H	More sound plays through the right
				side
DETAILED SETUP
			INITIALISE ALL

Settings

You can perform more detailed setting in various items.

OSD DESIGN

You can change the background colour of the menu. Press I H to select the required option.

TYPE1	Semi transparent black
TYPE2	Solid blue
TYPE3	Semi transparent dark blue

SXGA MODE

You can switch the setting between SXGA and the larger setting, SXGA+. Press I H to select the required option.

You can reset all of the customised settings to the factory defaults except NETWORK, LAMP RUNTIME and FILTER REMAINING menu settings.

You can reset all of the customised settings to the factory defaults except LAMP RUNTIME and FILTER REMAINING menu settings.

1.Press the ENTER button

2.Turn off the projector by pressing the POWER button.

3.Switch off the MAIN POWER button to reset the projector.

4.The minimum required setting screen will be displayed.

See “Minimum required setting screen” on page 12.

ENGLISH - 38